Dirt sensor, Canister care, Removing clogs – Kenmore ASPIRADORA 116.29914 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DIRT SENSOR

The DIRT SENSOR
light system is mount­
ed on the PowerMate
no

22

le near the reset

button. It consists of a
series of two red lights
and two green lights.
The lights give you an indication of the amount
of dirt particles that are passing through the
sensor on its way to the dust bag.

INITIAL START UP

When the Poweryate is first started, the fol­
lowing light sequence occurs in a two-second
time frame:

1. Two reds come on,

2. Two greens are on and will remain on until
the PowerMate nozzle is placed in use.

NOTE: if the nozzle is on a surface that has

dirt on it, dirt will be picked up by the vacuum

cleaner and the red lights might stay on

IN OPERATION

When the PowerMate is being moved back

and forth on the floor, the lights will change

from one configuration to another as dirt is

being vacuumed- As long as the red lights are
on, dirt is passing through the wand to indicate
that the surface still needs cleaning.

When the green lights stay on as the
PowerMate is moved back and forth over an
area, the sensor is not seeing enough dirt to

warrant further cleaning of that area,

NOTE: Dirt sensor lights DO NOT function . .
in the FLOOR setting

iLtJ

'B

CANISTER CARE

REMOVING CLOGS

The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries the
dirt to the dust bag through the airflow pas­
sages, The dust bag lets the air pass
through, white it traps the dirt.

For best cleaning results, keep the airflow
passage open. Check the starred areas
occasionally for dogs. Turn off and
unplug vacuum cleaner from outlet
before checking.

Motor

Safety _

.

F/fter B'ftausf

Filter

S

t

--

15

Advertising
This manual is related to the following products: