Kenmore 625.38306 - Manual (Page 72)

Faceplate Timer Features
California Efficiency Requirement
Your Kenmore Water Softener has a “High Efficiency”
feature with an “ON” or “OFF” setting. This softener
setting is shipped in the “OFF” position, which utilizes
the maximum rated capacity while most often achiev­
ing maximum salt efficiencies. When installing this unit
in the State of California, you MUST turn this setting to
the “ON” position which may initiate more frequent
recharges, however it will operate at 4000 grains per
pound of salt or higher.
EFFICIENCY MODE
When this feature is ON, the water softener will operate
at salt efficiencies of 4000 grains of hardness per pound
of salt or higher. (May recharge more often using smaller
salt dosage and less water).
Installations in the state of
California require this setting to be turned ON. This
softener is shipped in the OFF setting.
To turn this setting ON:
1. Press and hold the SELECT button until the display
shows 000-.
SET
П ®
Lin
FIG. 34
2. Then press (do not hold) the SELECT button again.
Use the UP arrow to turn ON.
3. Press SELECT to enter and return to normal running
screen. The efficiency icon will only be displayed when
this feature is ON.
PROGRAM MEMORY
If electrical power to the softener goes off, the time dis­
play is blank but the face plate timer keeps the correct
time for about 6 hours. When electrical power comes on
again, you have to reset the present time only if the dis­
play is flashing. The HARDNESS, RECHARGE TIME
and SALT LEVEL never require resetting unless a
change is desired. Even if the timer is incorrect after a
long power outage, the softener works as it should to
keep your water soft, however, regenerations may occur
at the wrong time of day until you reset the timer to the
correct time of day.
ERROR CODE
An error code could appear in the face plate display if a
problem occurs in the softener electronics. Turn to the
Troubleshooting section to resolve the problem and/or
call the Kenmore Water Line number listed below.
FIG. 35
Questions? Call The Kenmore Water Line 1-800-426-9345
24