Do not, Canceling a cycle, To stop the drain – Kenmore 790.16777 User Manual

Page 15: To clear the indicators, Changing a cycle or setting, During the first minute of a cycie, After the first minute of a cycle, Cancel, Adding items during a cycle, To add items

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

( CHINA ì

Use this cycle for china

and crystal. This cycle
uses a light wash and
gentle dry. During the

heated dry, the heating
element cycles on and

off.

Use
covered
detergent
dispenser
section.

Soil

Level

Sensed

Wash

Rinse

Main

Wash

Rinse

Final

Heated

Rinse

Dry

Time

(min)

Water

Usage
(gal/L)

Heavy

130°F

(54“C)

cycled

70*

6.5/24.6

Ught

130'F

(54“C)

cycled

60*

4.3/16.3

f

QUICK

]

t

RINSE

I

Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
away.

'

Do not
use
detergent

with this
cycle.

Soil

Lev«l

Sensed

Heavy

Light

Wash

Rinse

Main

Wash

Rinse

Final

Heated

Rinse

Dry

Time
(min)

IS

14

Water

Usage

(aal^)

4.3/16.4

2.2/8.2

NOTE: The sensor in your dishwasher monitors the soil
level. Cycle time and/or water usage can vary from the
numbers above as the sensor adjusts the cycle for the

best wash performance.

Canceling a Cycle

Anytime during a cycle, press

CANCEL)

DRAIN

CANCEL7DRAIN glows. The dishwasher pauses for about
5 seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely. The light goes off when the
dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain

immediately. Remember to drain the dishwasher before
starting a new cycle.

NOTE: A small amount of water remains in the dishwasher.

This is normal.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear
all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycie

Press a new cycle and/or options.

After the first minute of a cycle

1. Press

A

CANCEL

DRAIN

CANCEL/DRAIN glows. The dishwasher pauses for 5
seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely.

2. Check the detergent dispensers. If the main wash cup

has opened and the detergent washed away, refill the
cups as needed.

3. Close the door.

4. Press a new cycle and/or options.

5. Press START.

r

Adding Items During a Cycle

You can add an item anytime before the main wash starts.

Open the door and check the detergent dispenser. If the
main wash section is still closed, you can add items.

To add items

1. Lift up the door latch to stop the cycle. Wait for the

spraying action to stop before opening the door.

2. Open the door. If the main wash detergent dispenser is

still closed, add the item.

3. Close the door, but do not latch it. Wait 30 seconds for

the air in the dishwasher to warm up. This reduces the
amount of moisture escaping from the vent when
restarting a cycle.

4. Close the door firmly until it latches. The dishwasher

resumes the cycle after about a 5 second pause.

15

Advertising
This manual is related to the following products: