Kenmore 790.16777 - Manual (Page 17)

Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle
Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/Drain.
SENSING WATER HEATING WASHING RINSE
Sensing
Your dishwasher senses the soil level on the dishes. Soil
level determines the length of some cycles, the amount of
heat added to the wash or rinse, and the cycle needed for
the load. SENSING glows during the soil sensing parts of
the cycle. Wash action continues while sensing occurs.
Water Heating
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or
rinse action continues as the water Heats.
Lock On
When LOCK ON is lit, all buttons are disabled.
Drying System
During drying, you can see steam escaping through the
vent at the upper left corner of the door. This is normal as
the heat dries your dishes.
%
i ^ \/ I *
ff X
X __I
IMPORTANT: The vapor is hot. Do not touch the vent
during drying.
Overfill Protection Roat
The overfill protection float {in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It
must be in place for the dishwasher to operate.
LOCK O n
You can turn on the Lock while the dishwasher is running.
To lock or unlock the controls, see “Option Selections."
Check under the float for objects that may keep the
protector from moving up or down.
17