Perfcmmancbsarety tcatures, Motor protection system, Agitator motor overload protector – Kenmore ASPIRADORA 116.35913 User Manual

Page 12: Perfcmmancbsarety tcatures motor protection system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PERFCmMANCBSAreTY TCATURES

MOTOR PROTECTION SYSTEM

Motor Protector

This vacuum cleaner has a motor protector

by-pass valve which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. If the by-pass valve
opens to prevent motor overheating and

possible damage to the vacuum cleaner,

you will notice a change of sound as air

rushes through the valve opening.

To correct problem; See the TROUBLE­
SHOOTING section.

NOTE: The motor

protector may open

when using

attachments or
when cleaning new
carpet, due to
reduced airflow
caused by the

attachments

themselves or by

new carpet lint filling
the dust bin quickly.
See the TROUBLESHOOTING section.

Motor Protector
(Behind Hose)

Note: Do not block motor protector.

Thermal Protector
This vacuum cleaner has a thermal

protector, which automatically trips to
protect both the vacuum cleaner and the
agitator motor from overheating. If a clog

prevents the normal flow of air to tfie motor,

the thermal protector turns the motor off

automatically. This allows the motor to cool
in order to prevent possible damage to the
vacuum cleaner.

To correct problem; Turn the vacuum

cleaner off and unplug the power cord from

the outlet to allow the vacuum cleaner to

cool and the thermal protector to reset.
Check for and remove dogs, if necessary.

See page 19, CLOG REMOVE section.

Also check «md replace any dogged filters.
Wait approximatety tttirty (30) minutes and

plug the vacuum cleamer In and turn back
on to see if the motor protector has reset.

AGITATOR MOTOR

OVERLOAD PROTECTOR

The agitator motor has built-in protection
against motor damage should the agitator
jam. If the agitator slows down or stops, the

agitator overload protector shuts off the

agitator motor. The vacuum cleaner motor

will continue to run.

To correct prd>lem: Turn off and unplug
vacuum cleaner, remove obstruction, then

press reset button.

To reset: Push in

the agitator

overload protector
button.

If the pr<d>Iem persists, have the vacuum

deaner serviced by a Sears or other

qualified technidan.

12

Advertising
This manual is related to the following products: