Warning, To remove light bulb, Caution – Kenmore ASPIRADORA 116.35913 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

WARNING

Electrical Shock Or Personal Injury
Hazarxl

Disconnect electrical supply before
performing maintenance to the unit
Failure to do so could result in
electrical shodc or personal injury
from the vacuum cleaner suddenly
starting.

TO REMOVE LIGHT BULB

1. Disconnect power cord from electrical

outlet.

Flat

Screwdriver

Slots

Headlight
Lens

2. Press han­
dle release
pedal and lay
vacuum clean­
er back.

3. Pry light
lens out at slot
in rear as
shown on both
sides. Rotate

lens up and lift
off.

A

CAUTION

Do not use a bulb rated over 9W (13V).
During extended use, heat tiom the bulb
could overheat surrounding plastic
parts.

4. Remove the light
bulb by pulling
straight out.

5. To replace the

light bulb carefully
insert fully into slot.

Note:

See

PARTS AND FEATURES

for

bulb number.

A

CAUTION

Do not plug in or turn on until the vacu­
um cleaner is completely reassem­

bled.

6. To replace light

lens, place tab at
front of lens into

slot. Rotate lens

down and firmly
snap into place.

18

Advertising
This manual is related to the following products: