Warning, Electrical shock hazard, Motor safety filter – Kenmore ASPIRADORA 116.35623 User Manual

Page 15: Electrostatic, Do not operate without exhaust filter, Exhaust filter, Hepa

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Check motor safety filter frequently and
change when dirty.

A

WARNING

Electrical Shock Hazard

Unplug power cord from electrical

outlet. Do not operate the vacuum
cleaner without the motor safety
filter. Be sure the filter is dry and

properly installed to prevent motor

failure and/or electrical shock.

Motor

Safety
Filter

Remove the dust bag as outlined in the

DUST BAG REPLACEMENT

section.

MOTOR SAFETY FILTER

ELECTROSTATIC

1. This white & grey
filter must be
replaced when dirty.
It should be
replaced regularly

depending on use

conditions.

The fil­

ter CANNOT be
washed as it will

lose its dust trap­
ping ability.

Note:

See

PARTS AND FEATURES

for

motor safety filter number.

2. If the filter,
located in the bot­
tom of the bag
cavity, is dirty,

remove it by

pulling forward out
from under the

ribs.

Motor
Safety
Filter

3. Replace the
filter, smooth
(white) side up,
by sliding it back
into place under

the ribs in the
bag cavity.

Replace the bag as outlined in the DUST

BAG REPLACEMENT

section.

A

WARNING

Do not operate without exhaust
filter.

EXHAUST FILTER

HEPA

The exhaust filter cartridge must be

replaced when dirty. It should be
replaced regularly depending on use

conditions.

The filter CANNOT be

washed as it will lose its dust trap­

ping ability.

Note:

See

PARTS AND FEATURES

for

the exhaust filter number.

Slide the

exhaust filter
cover release
down. Pull out
on exhaust fil­
ter cover to

remove from

bag cover.

Bag

Cover-

Exhaust Filter

Cover Release-

. .

Exhaust

Xk

Filter

Cover—^

/lit

Exhaust
Filter

Remove the

exhaust filter car­
tridge from the
bag cover.

Replace the exhaust filter

cartridge, carefully posi­

tioning it so that it fits into
the bag cover. The black

edge of the filter
should be facing away

from the operator. Push

only on filter cartridge

frame, not on filter itself.

Exhaust Filter
Cover Release

Exhaust
Filter

Cover

Bag

Cover

Replace the

exhaust filter
cover and

secure the

latch by push­

ing it upward.

15

Advertising
This manual is related to the following products: