Warning, Handle assembly, Caution – Kenmore ASPIRADORA 116.35623 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, electnc shock, burns
and personal injury. CAUTION statements aiert you to such dangerous personal
injury and/or property damage.
A
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup
ply until the assembly is complete.
Failure to do so could result In elec
trical shock or injury.
Before assembling your vacuum cleaner, be
sure you have all the parts as shown in
PARTS AND FEATURES.
Attach stretch hose
end to nozzle as
shown.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum cleaner.
mw
Position the handle as shown in the illustra
tion below.
Slide the handle into the opening at the top
of the vacuum cleaner.
Handle
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly. Using a screwdriver, tighten the
screw.
A
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screw In place.