A warning, Warning, Important safety instructions – Kenmore 796.4027 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

A WARNING

m

Z

O
r

(7)

To reduce the risk of fire, electric shock, or injury to

persons when using this appliance, follow basic
precautions, including the following.

Unplug the washer before cleaning

to avoid the

risk of

electric shock.

Never

use harsh chemicals, abrasive cleaners, or

solvents to clean the washer.

They will damage the finish.

• Do not put oily or greasy rags or clothing on top of the

washer.

These

substances

give off vapors

that

could ignite

the

materials.

■ Do not wash items that are soiled with vegetable

or

cooking oil.

These items may contain some oil after

laundering and may catch fire.

■ Disconnect this appliance from the power supply

before attempting any user maintenance. Turning

the

controls to the

OFF

position does not disconnect

this

appliance from the power supply.

Failure to follow this

warning can

cause

serious injury, fire, electrical shock, or

death.

>

Do not combine detergents, fabric softeners, and other

laundry products from different manufacturers for use
in one load unless specified on the label.

>

Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when
using laundry products.

Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

>

Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, push In the

cycle selector knob and allow the drum to coast to

a

complete stop before reaching inside.

Failure

to follow this warning can cause serious injury, fire,

electrical shock, or death.

A

WARNING

Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures.

Installation instructions are packed

in the washer for installer's reference. If the washer is
moved to a new location, have it checked and reinstalled by
a qualified service person. Failure to follow this warning

can

cause serious injury, fire, electrical shock, or death.

Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord.

Failure to

follow this warning can cause serious injury, fire, electrical
shock, or death.

For personal safety, this appliance must be properly

grounded.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• The power cord of this appliance is equipped with a 3-

prong (grounding) plug which mates with a standard 3-
prong (grounding) wall outlet

to minimize the possibility

of electric shock

hazard

from this appliance.

This washer must be plugged into a 120VAC, 60Hz

grounded outlet.

Failure to follow this warning can cause

serious injury, fire, electrical shock, or death.

Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly
grounded.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

Where a standard 2-prong wall outlet is encountered, it

is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.

Failure to follow this warning can cause serious injury, fire,

electrical shock, or death.

Do not install on carpet. Install washer on a solid fioor.

Failure to follow this warning can cause serious leak

damage.

Do not remove grounding prong. Do not use an

adapter or extension cord. Plug into a grounded 3-

prong outlet.

Failure to follow these warnings can cause

serious injury, fire, electrical shock, or death.

- The washer should always be plugged into its own

individual

electrical

outlet which has a voltage rating

that matches the rating plate.

This provides the

best

performance and

also

prevents overloading house wiring

circuits which

could

cause a fire hazard from overheated

wires.

• Never unplug your washer by pulling on the power

cord.

Always grip plug firmly and pull straight out from the

outlet. Failure to follow

this

warning can cause serious

injury, fire, electrical shock, or death.

• Immediately repair or replace all power cords that have

become frayed or otherwise damaged. Do not use a

cord that shows cracks or abrasion damage along Its

length or at either end.

Consult with

a

qualified

service

person. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.

• When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord.

Failure

to

follow this warning can cause serious injury, fire, electrical
shock, or death.

>

The washer must be installed and electrically

grounded by a qualified service person in accordance
with localcc^es

to

prevent

shock hazard and assure

stability during operation.

>

Washer is heavy. Two or more people may be needed

to install and move the appliance.

Failure

to

do so

can

result in back or other injury.

• Store and install the washer where it will not be

exposed to temperatures below freezing or exposed to
outdoor weather conditions.

Failure to follow this

warning can cause serious leak damage.

>

To reduce the risk of electric shock, do not instail the

washer in humid spaces.

Failure to follow this warning

can cause serious injury, fire, electrical shock, or death.

Advertising