Transporting and storing, Before storing all surface floor cleaner, Transporting all surface floor cleaner – Kenmore 114.85925 User Manual
Page 15: Storing all surface floor cleaner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replace filter by
grasping angled top of
filter and turning
clockwise to lock onto
filter/float assembly.
Return filter/float
assembly to Dirty
Water Tank. To ensure
proper fit, make sure
the arrow on the filter/
float assembly lines
up with the Align Filter
Front arrow on Tank-
in-Tank™.
■
TRANSPORTING AND STORING
TRANSPORTING
ALL SURFACE FLOOR
CLEANER
Put handle in locked position.
Turn unit off.
Store cord.
Tilt unit back on rear wheels and push
forward. NOTE: Use the carry handle to
transport the unit up and down stairs.
A
CAUTION
Do not store the All Surface
Floor Cleaner in garage or area
where unit could freeeze.
NOTE: Do not store unit with any
liquid in either the Clean Water Tank or
Dirty Water Tank.
STORING ALL
SURFACE FLOOR
CLEANER
BEFORE STORING ALL SURFACE
FLOOR CLEANER:
• Empty and rinse Tank-in-Tank“ System
• Clean filter
• Replace Tank-in-Tank™ System
• Wrap cord around quick cord release
and lower cord wrap
• Make sure that unit is fully dry prior to
storing.
15