Section 2, D. typical threaded in and out pipes to softener, Deluxe valve models – Kenmore Water System User Manual
Page 11: Outside, Faucets, Fittings required not identified, 90* elbow (2) union (2) pipe (as reg.), Valve, Plan your installation, Outlet 1 " x 3/4" reducer' valve
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ls
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:”
SECTION 2
Ls
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:^.
м
.
м
j
jj
:.
PLAN YOUR INSTALLATION
D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER
FIG. 5
If you are planning a threaded plumbing installation, with a 3-valve bypass, use the
drawing in Fig. 4 as a guide. Use union fittings, as needed, to connect the plumbing.
DELUXE VALVE MODELS
OUT
Outside
Faucets
FITTINGS
REQUIRED NOT
IDENTIFIED
90* Elbow (2)
Union (2)
Pipe (as reg.)
SOFTENER
NOTE:
It may be easier to slip the pressure fit ground
clamps onto the plumbing prior to making all
connections permanent. See page3-8.
Outlet
1 " X 3/4" reducer'
VALVE
*NOTE:
For 1 in. plumbing connection,
usea1 in. threaded straight connec
tor.
2-5 Deluxe Valve
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line