Kenmore ULTRA WASH 665.77925 - Manual (Page 6)

Ulii
The ULTRA WASH® Soil Removal System gives you sparkling
clean dishes, while using less energy and time. The ULTRA
WASH® Soil Removal System includes:
■ A Triple Action Filtration system that intermittently filters soil
from the wash water, thus eliminating the need to scrape
dishes.
i¥al System
An ULTRA WASH® optical soil sensor that detects soil level
and detergent quantity appearing in the wash water and
adjusts the cycles as needed.
An Automatic Temperature Control (АТС) that ensures the
proper water temperature for the selected wash cycle, dish
load size, and soil level of the load.
■asn* cle
How the smartwash’^'^ wash cycle works
When the smartwash'^'^ cycle is selected, it saves energy and
water by adjusting the wash cycle as needed.
■ Sensors detect the size of the dish load, the soil level, and the
water temperature in the dishwasher.
■ Sensors automatically adjust the temperature and the
amount of water used for the load.
This dishwasher will automatically calibrate the sensor
approximately once a year to your water quality.
IMPORTANT: The very first wash cycle after installation in your
home will be adjusted to include an additional
2 rinses for optical
soil sensor calibration. For proper calibration, the first cycle
should not be interrupted. If this calibration cycle is canceled or
stopped before the Clean light comes on at the end of the cycle,
the next wash cycle will repeat this sensor calibration.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety
information and useful operating tips.
Rinse aid is essential for good drying. Be sure to fill the 5.
dispenser before you use your new dishwasher. Each filling 0 _
will last about 1 to 3 months depending on your usage. '
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
3. Properly load the dishwasher. (See “Dishwasher Loading.”)
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing keeps the spray arm(s)
from spinning freely.
.'1
4. Add detergent. Always use a high-quality brand detergent.
(See “Dishwasher Use.”)
Push door firmly closed. The door latches automatically.
Run hot water at the sink nearest your dishwasher until the
water is hot. (See “Dishwasher Efficiency Tips.”) Turn off
water.
Press the desired cycle and option selections. (See
“Dishwasher Use.”)
Press START/RESUME, or press START/RESUME to repeat
the same cycle and options as the previous cycle.
IMPORTANT: The Start/Resume light will flash if the door is
opened during a cycle. Power interruptions during a cycle
may also cause the Start/Resume light to flash. Press START/
RESUME to continue a cycle.