Kenmore 415.1615111 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Heat Diffusers
□ Place heat diffusers over burners by inserting tabs into slots in front of firebox. Opposite ends of
heat diffusers rest on pins in back of firebox.
-Pin
Cooking Grate and Swing Away
O Place cooking grates onto grate rests.
□ Insert ends of Swing Away pivot wire into holes in sides of grill lid. insert ends of Swing Away leg
wire into holes in sides of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under
wires running front-to-back. If pivot and leg wires are on top. Swing Away is installed upside-down.
□ Unscrew ignitor cap and place AA battery into ignitor slot with positive end {+) facing outward.
Screw ignitor cap onto ignitor.
Pivot Wire
Swing
Av/ay
Lee Wire
Cooking Grate
A A 3a-Tory
464220311 • 21