Recall and change of settings, Pause between stages, Regular timer – Kenmore 88762 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below.
• To check the setting for a given stage, touch MEMORY/RECALL one or more times until the correct stage light
and indicator light turns on. The set TIME or TEMP CONTROL for that stage will show in the display window.
• To check the cooking power level, touch POWER CONTROL.
To recall (check) a setting while the oven is operating, follow the directions below.
• To check settings while the oven is operating, touch the desired pad to recall the setting for the operating stage.
• To recall a future stage, touch STOP, follow the directions above for recalling (checking) a setting before starting
the oven, and then touch START to continue cooking.
• To recall TIME OF DAY during cooking, touch TIME OF DAY. It will show momentarily in the display window.
To Change a Setting
Recall the setting to be changed by following the directions above and make the change as follows:
• Touch STOP................................................... The oven will stop cooking.
• Touch TIME ............................ ..................... Then touch
“0”
until only one
“0”
shows in the display
window. Set the cooking time.
• Touch TEMPERATURE CONTROL........... Set cooking temperature.
• Touch POWER CONTROL........................... Set cooking power level. To reset to “HI,” set “99,” maxi
mum power.
PAUSE BETWEEN STAGES
Some recipes require stirring, turning and adding or removing of foods between stages. To set the oven to stop between
stages, touch PAUSE rather than MEMORY/RECALL when setting the oven. After the pause, to restart the oven,
touch START.
REGULAR TIMER
Your oven also has a timer that can be used for noncooking functions. When used as a regular timer, the oven is not
running. The timer is simply counting down in seconds. For detailed instructions on using this timer, see below:
To use the regular timer feature:
1. Touch CLEAR.
2. Touch TIME.
3. Touch correct numbers for the time.
4. Touch POWER CONTROL.
5. Touch “0” (power level 0).
6. Touch START. The time will begin counting down in the display window with no cooking or heating in the oven. A
tone will sound and the word “End” will show in the display window when the time is over.
12