Kenmore 88762 - Manual (Page 27)

MULTI-STAGE COOKING
(Cont’d)
Second Stage (3 minutes: “HI”)
6. Touch MEMORY/RECALL.
The light below COOK 2 will go
on. The display window will
show “0.”
7. Touch TIME.
8. Set 3 minutes by touching “3,”
“0” and “0.” “300” will show in
the display window. (Power is
on “HI.”)
9. Touch START. The first stage
will begin. “700” will show in the
display window. The oven will
begin to cook at “50 (SIMMER)”
and the time will begin to count
down in the display window.
When the 7 minutes are over, a
tone will sound and the oven
will change itself into the second
stage. The oven will begin to
cook at “HI.” When the 3
minutes are over, a tone will
sound and the word “End” will
show in the display window and
the oven will shut itself off. The
oven will have finished both
stages.
NOTE: When temperature con­
trolled cooking is set in the second
stage, the oven will switch into
“Hold Warm” after cooking. The
“Hold Warm” will continue for 60
minutes after the food reaches the
chosen temperature or until the
door has been opened or until
STOP has been touched.
DELAY-START COOKING (88761 MODEL)
Delayed cooking can be done by using the MULTI­
STAGE COOKING feature. After counting down the
preset delay time, the oven will cook for the chosen
cooking time.
1. Touch CLEAR.
2. Touch TIME.
3. Touch the correct numbers for the required delay
time.
4. Touch POWER CONTROL.
5. Touch “0” (power level 0).
6. Touch MEMORY/RECALL.
7. Touch TIME or TEMP CONTROL.
8. Touch the correct numbers for the required cooking
time or cooking temperature.
9. Touch POWER CONTROL.
10. Touch the correct numbers for the cooking power
level desired.
11. Touch START.
NOTE: A preset delay time must be less than 99
minutes.
27