Suggested pile height settings, Attachments, Caution – Kenmore 116.23812300 User Manual

Page 10: Attachments on handle, Note, Attachments on wands, Suggested pile height settings attachments

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SUGGESTED PILE HEIGHT SETTINGS

For best deep down cleaning, use the XLO

setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:

HI - Shag, deep pile, or scatter rugs.

MED - Medium to deep pile.

LO - Low to medium pile.

XLO - Most carpets and bare floors.

ATTACHMENTS

A

CAUTION

DO NOT attach or remove handle or

wands while cleaner is ON. This

could cause sparking and damage

the electrical contacts.

Lock
Button

ATTACHMENTS ON HANDLE

NOTE: if the
Power-Mate*' is

attached, turn
cleaner off
before remov­
ing handle

from wands.

1. Press lock

button, then
pull to remove
handle from
wand.

Upper

leaner

If your model has the optional feature of a

handle release, press it in a similar fashion.

2. Slide attachments

firmly on handle as

needed. See ATTACH­
MENT USE.

Dast/ng

Brush

NOTE:

To assemble
dusting brush
insert the fabric
brush into the
dusting brush
nozzle and
press into place

Fabric
Brush

To remove, press latch and lift out.

ATTACHMENTS ON WANDS

1.To
remove

wands from

Power­
Mate*', lock

wands in

straight-up
position.

3. Put attach­
ments on

wands as
needed. See

ATTACHMENT

USE.

2. Press wand quick

release pedal with foot

and pull the wands
straight up and out of

Power-Mate*.

The Power-Mate® plug
and cord do not have
to be removed to use
attachments on the
wands.

10

Advertising
This manual is related to the following products: