Cocoon POWERTALK 101 - Manual (Page 10)

PowerTALK 101
9
PowerTALK 101 overview
Feature overview
•
PowerTALK 101 can transport any serial protocol over standard Ethernet networks using
standardised transmission methods
•
PowerTALK 101 can be Installed at any point on an Ethernet network
•
Communication parameters can be changed from any port: local, remote or networked
•
PowerTALK 101 is delivered with a standard IP to which it always respond.
•
PowerTALK 101 can be configured with a second IP to fit into your network scheme.
•
Configuration parameters such as IP and baud rate are stored in non-volatile memory
•
Any port can be moved, replaced or upgraded without disruption to the network
•
Data is available anywhere on the network - across campus or across countries
•
Supports full or half duplex connections
•
Data can be addressed to one port or to all ports simultaneously, depending on the
configuration
•
Individually configurable PowerTALK device passwords are implemented for network
access control
•
Individual local serial port passwords fixed for local access
PowerTALK 101 re-establishes each logical connection upon restart after a network or power
failure. PowerTALK 101 controls remote equipment. PowerTALK 101 gives Ethernet sites total
system uniformity. Now you can manage connections between non-Ethernet equipment with the
ease of Ethernet.