Cocoon POWERTALK 101 - Manual (Page 15)

PowerTALK 101
14
Device and terminal identification
Typical label for the 230VAC model, mounted on rear of PowerTALK 101:
Dimensions
PowerTALK 101 maximum dimensions.
Above dimensions exclude the terminal rail at the back of the PowerTALK 101 box.
Rear DIN rail
The 35mm DIN rail is provided for convenience, to mount up to two PowerTALK 103 RS-485
converters or other third party rail mount equipment such as power supplies, etc.
Additional power supply outputs
An additional power supply unit for external equipment with mounting holes 90mm x 90mm may
be mounted inside or outside the box, using the 4mm diameter holes provided. Such power
supply may be obtained from third parties, or from COCOON. See pages 8, 17 and 21.
Face plate care & maintenance