Cocoon POWERTALK 101 - Manual (Page 43)

PowerTALK 101
42
Setting and configuring PowerTALK 101
Default settings:
9600 8N1
Port 1 = Ch 1
Port 2 = Ch 2
A
Port 1 = Ch 1
Port 2 = Ch 2
B
Use Windows’
HyperTerminal,
connected with
a Laplink cable Use the red server flylead to
connect Ethernet ports
Setting and configuration
Any PowerTALK 101 unit can be remotely configured from any connected PowerTALK 101 serial
port or Ethernet port. In above example, “A” is connected using a serial connection, and “B” is
connected using its network port. In both cases PT.EXE can be used to configure the PowerTALK
101 unit.
For configuration detail, see the section on PT.EXE parameters.