To change, Temperature setting, To adjust fan speeds – Kenmore Air Conditioner User Manual
Page 5: Air cofnclitioner features, Do this
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Air Cofnclitioner Features
(continued)
TO TURN UNIT ON;
NOTE:
The
following
instruction
represent
the
Touch
Pad,
the
same instructions can be used for the Remote Control.
YOU WILL SEE;
I nr*' ^ ^
. 'It?
■'ii
DO THIS:
-PRESS ON/OEE
PAD
i'ftiiBÉej
{Sfeep;
. 7
TO CHANGE
TEMPERATURE SETTING:
YOU WILL SEE:
Note: Tap or hold either
up(A)
or down(v) button until the
desired
temperature
is
seen
on
the
display.
This
temperature
will
be
automatically
maintained
anywhere
between 60E (16C) and 90E (32C). If you want the display
to read the actual room temperature. See " To Operate on
Fan Only " section on Page 6.
TO ADJUST FAN SPEEDS:
YOU WILL SEE;
A 2 Digit Display is used to indicate the Fan Speed setting,
from 10 through 99. When the " SLOWER" button is
pressed the motor speed will slow down at various
intervals, to a minimum setting of 10. To speed the motor
up, press the" FASTER" button. The speed will increase at
various intervals to a maximum setting of 99.