Additional things you should know, Auger type, Air conditioner features – Kenmore Air Conditioner User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar

with.

* The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents

overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.

* The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.

* The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other

and back, press and hold the 'TEMP/TIMER "Up (^) and Down ( \y) buttons together for 3 seconds.

....... .

Fresh Air Vent Control

(On some models)

The Fresh Air Vent allows the air conditioner to:

1. Recirculate inside air Vent Closed (see Fig. 1)

2. Draw fresh air into the room— Vent Open (see Fig. 2)

3. Exchange air from the room and draws fresh air into the room

Exhaust Open (see Fig. 3)

Vent and

; ,VL .1 .C_w_L_,

Figure 2 (VENT OPEN)

Figure 3 (VENT & EXHAUST OPEN)

Air Conditioner Features

Air Directional Louvers

,

Air directional louvers control air flow direction. Your air conditioner has the louver
type described below.

Auger Type

The louvers will allow you to direct the air flow Up or Down and Left or Right
throughout the room as needed. Rotate the Auger Wheel until the desired direction

is obtained.

(8-WAY)

AUGER WHEELS

Advertising