Sleep feature, You will see, Air conditioner features – Kenmore Air Conditioner User Manual
Page 7: Do this, Timer: delay stop / start feature, You will see: timer setting, Sleep feature: you will see
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Air Conditioner Features
(continued)
TIMER: DELAY STOP / START
FEATURE
*
i Sleeps
■ -.mil ■
• I®-
DO THIS:
PRESS
TIMER BUTTON
YOU WILL SEE: TIMER SETTING
LIGHT On
I
Note: For Delay Stop, the unit must be in the On position.
Note: For Delay Start, the unit must be in the Off position.
To adjust timer setting, tap or hold the UP
arrow(A)
DOWN
arrow(v)
to
change
delay
timer
at
.5
hour
increment, up to 10 hours, then at 1 hour increments up
to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7, etc.). The Delay Start mode
automatically selects cooling with maximum Fan Speed.
The temperature maintained will be the same as previously
set. To change the set temperature, press" COOL" then Up
or Down arrows until the desired temperature is indicated
on
the
display.
After
5
seconds,
the
control
will
automatically
change
the
display
back
to
the
hours
remaining until the unit will start/stop. Turning the unit
" ON" or" OFF" at any time will cancel the Delay Start/Stop
function.
-
Si
V
»
...
»
-■ I.'
Th'S Ct
fSIseii;
iiil/ili
SLEEP FEATURE:
YOU WILL SEE:
PRESS SLEEP
BUTTON
LIGHT On
Note: In this " MODE" the selected temperature will
increase by 2 degrees F 30 minutes after the mode is
selected. The temperature will then increase by another 2
degrees F after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it returns
to
the
originally
selected
temperature.
This
ends
the
" Sleep" MODE and the unit will continue to operate as
originally programmed. The " Sleep" MODE program can
be cancelled at any time during operation by pressing
" Sleep" MODE button.