Press, Q^for, Display – Kenmore ELITE 790.467 User Manual

Page 16: Setting kitchen timer figure 4, To set the kitchen timer (example for 5 minutes), To set add 1 minute feature, Setting oven controls (con’t)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The TIMER and FLEX CLEAN (^E) pads control the Continuous Bake or 12 Hour Energy Saving features. The oven

control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for

more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

Setting Oven Controls (con’t)

Setting Continuous Bake or 12 Hour Energy Saving

or

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features

1. Press and hold (|^for7 seconds (Figurel). After? seconds "12h"

-h" will appear in the display and the control will beep once.

2. Press to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (Figure 2) in the display indicates
the control is set for the 12 Hour Energy Saving mode and -h"
indicates the control is set for the Continuous Bake feature (Figure 3).

3. Press START to accept the change (Figure 4; display will return to

time of day) or press (

stom

to reject the change.

PRESS

Q^for?

seconds

DISPLAY

■ START

or

(

stop

Setting Kitchen Timer

Figure 4

The TIMER pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that

will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.

INSTRUCTIONS

To set the Kitchen Timer (example for 5 minutes)

PRESS

DISPLAY

1. Press

will appear and "TIMER" will flash in the display

(Figures).

2. Press the number pads to set the desired time in the display

(example (^^^). Press

start

;. The time will begin to count down

with "5:00" and "TIMER" will stay in the display (Figure 6). Note: If

START ¡s not pressed the timer will return to the time of day after 25

seconds.

3. When the set time has run out, "End" and "TIMER" will show in the

display (Figure 7). The clock will sound with 3 beeps every 5

seconds until is pressed.

To cancel the Kitchen Timer before the set time has run out

Press The display will return to the time of day.

CD DD'

Figures

8

'fin

uu

Figures

E hd

Figure?

To Set Add 1 Minute Feature

The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the pad is pressed, 1 minute is added

to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the pad is

pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.

16

Advertising