Seif-cleaning, Self-clean cycle time length, Instructions press – Kenmore ELITE 790.467 User Manual

Page 35: Display, Q n r i 5u l l h, When the self-clean cycle is completed, Stopping or interrupting a self-cleaning cycle, H: 30 end, S'3u

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Seif-Cleaning

What to Expect during Cleaning

While the oven is in operation, the oven heats to temperatures much higher than those
used in normal cooking. Sounds of metal expansion and contraction are normal. Odor
is also normal as the food soil is being removed. Smoke may appear through the oven
vent. If heavy spillovers are not wiped up before cleaning, they may flame and cause
more smoke and odor than usual. This is normal and safe and should not cause
alarm. If available, use an exhaust fan during the self-cleaning cycle.

The cooktop lockout Q feature will be activated during the self-clean and will unlock

after the oven has cooled down.

Self-Clean Cycle Time Length

The FLEX CLEAN pad controls the Self-Cleaning feature. If you are planning to

use the oven directly after a self-clean cycle remember to allow time for the oven to
cool down and the oven door to unlock. This normally takes about one hour. So a 3
hour self-clean cycle will actually take about 4 hours to complete.

*lt is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for
average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

INSTRUCTIONS

PRESS

To set the controls for a 3 hour Self-Cleaning cycle to
start immediately and shut off automatically

1. Be sure the clock is set with the correct time of day and the oven

door is closed.

2. Press (a^. "CLEAN" will flash and "3:00" HR will show in the

display (Figure 1). The control will automatically clean for a 3

hour period (default self-cleaning cycle time). Note: If a 2 or 4

hour clean time is desired, press (2)

for 2 hour or

press (^4^

C5) for a 4 hour clean time. Set the cleaning

time based on the amount of soil: light, medium or heavy (* See
above).

3. Press .START . The "DOOR LOCKED" icon will flash; "CLEAN",

Q icon and the letters "CLn" will remain on in the display

(Figure2).

4. As soon as the control is set, the motor driven oven door lock will

begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.

Also, the oven icon will appear in the display (Figure 3).

Note: Allow about 15 seconds for the oven door lock to close.

ik CAUTION

iTo avoid possible

burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the
oven when opening the door to
allow hot airor steam to escape.

A CAUTION

DO NOT force the

oven door open. This can damage
the automatic door locking
system. Use caution and avoid
possible burns when opening the
door after the Self-Cleaning cycle
has completed. The oven may
still be VERY HOT.

DISPLAY

i START

■"x.

3^uu

llh

Figure 1

q n r i

5u

l

l

h

Figure 2

□ n r i „

3U

llh

Figures

When the Self-Clean Cycle is Completed

1

. “END” will appear in the display. The time of day, the "DOOR

LOCKED" and "CLEAN" icon will remain in the display (Figure 4).

2. Once the oven has cooled down for approximately 1 HOUR, and

the "DOOR LOCKED" and Q icon is are longer displayed, the

oven door can then be opened (Figure 5).

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due

to excessive smoke or fire in the oven:

1. Press

2. The oven door can only be opened after the oven has cooled

down for approximately 1 HOUR and the "DOOR LOCKED" icon

is no longer displayed (Figure 5).

35

H: 30 End

Figure 4

S'3u

Figure 5

Advertising