Kenmore ULTRA WASH 15838 - Manual (Page 16)

Options
Option When should I use it? What does it do?
Water Heat
• Automatic with Pots & Pans
• Option for Normal Wash and
Water Miser cycles
• Not available for China Wash
or Quick Rinse cycles
To ensure water temperature in
Main Wash reaches 135°F
(57°C).
' When you select Water Heat, main wash
delays until water heats to 135°F (57°C).
• As water heats, washing action continues.
Water Heating status indicator glows and
electronic time display pauses until water
reaches proper temperature.
No Heat Dry
• Option for Pots & Pans,
Normal Wash, Water Miser
and China Wash cycles
Use when you do not need a
rapid dry cycle. Allow longer
drying times (overnight). Use
rinse agent to improve drying. •Turns off heating element in 30-minute dry
period.
Delay Start
• Option for any cycle
Use when you want to start a
cycle later.
Set delay to run dishwasher
during times when off-peak
utility rates are in effect or
when you are away from home.
Local utilities recommend this
to avoid heavy usage of energy
at certain times of day.
• Delay beginning of your selected cycle and
options in one hour increments up to nine
hours.
• To set:
1. Press cycle and option pads.
2. Press Delay Start pad. Increase delay one
hour for each press of Delay Start pad.
Total delay time appears on electronic
time display.
3. Press Start pad. Once Start pad is
pressed, delay begins. Delay time dis­
played on control panel flashes once.
Cycle and options begin as soon as delay
time expires. If Start pad is not pressed
within 30 seconds of final selection, you
need to re-select your cycle, options and
delay settings.
• You can change cycle and option selections
any time during delay period. You can also
eliminate the delay by pressing Start pad any
time. The dishwasher will start immediately.
1 5