Kenmore 630.7793 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RINSE AGENT
Rinse Agent
To achieve proper drying, always use a liquid rinse agent,
even if your detergent contains a rinse agent or drying
additive.
NOTE: The dishwasher indicates low rinse agent by showing
the •j'YC symbol in the countdown display. Units without a
display have a Rinse Agent LED that illuminates when the
Rinse Agent is low.
Add liquid rinse agent to the dispenser until the rinse agent
reservoir is full. Wipe up any excess rinse agent that puddles
when the dispenser reservoir is full.
After filling the rinse agent dispenser, the indicator light will
go out in a few minutes after the dishwasher door is shut.
Adding Rinse Agent
•
Always use Rinse Agent even if your detergent contains
rinse agent.
•
Add rinse agent when the LED on the control panel
illuminates.
Turn
To Decrease
Streaks on glasses
To Decrease
Spots on glasses
To add rinse agent, pour on the arrow.
Turn the arrow to adjust the amount of rinse agent
dispensed.
1 1