Operating the dishwasher, Warning – Kenmore 630.7793 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING THE DISHWASHER
Canceling a cycle
•
Open the door slightly to stop the cycle.
•
Wait for
a
few seconds before opening the door all the
way.
•
Press the “CHINA GENTLE” and “QUICK RINSE” button
at the same time.
•
Close the door. The dishwasher will drain any remaining
water.
Changing
a
cycle
•
Open the door slightly to stop the cycle.
•
Before opening door all the way, wait a few seconds
for water to drain to the base of dishwasher tub.
•
Press the “CHINA GENTLE” and “QUICK RINSE” button
twice to reset.
•
Select new cycles and options.
ADDITIONAL FEATURES
Countdown Display
The countdown display indicates the time remaining for a
cycle to complete. The time will change based on water
temperatures and control settings.
Time Delay
This option allows you to delay the start time of your dish
washer. To activate:
•
Turn the dishwasher on.
•
Select the desired wash cycle.
•
Press and hold the Delay Start button. Release when
the desired delay time is shown in the display window.
A
WARNING
You could be seriously scalded if you allow hot water
to splash out of the dishwasher. OPEN THE DOOR
CAREFULLY during any wash or rinse cycle. Do not fully
open the door until water noises have stopped.
1 4