Kenmore 141.178600 - Manual (Page 2)

Table of Contents Read These Safety Instructions
Warranty...................................................................2
Safety Instructions................................................... 2
Pre-Assembly Instructions....................................... 4
Hardware, Parts Diagram and Lists......................... 5
Assembly Instructions.............................................. 9
Lighting Instructions............................................... 17
Cleaning and Maintenance Instructions .... 19
Frequently Asked Questions................................. 21
Cooking Instructions.............................................. 22
Cooking Guide and Recipes.................................. 23
Kenmore Elite Grill Warranty
Full 1-Year Warranty on Grill
For one year from the date of purchase Sears will
repair or replace, at our option, any grill part
(except for paint loss and ignitor battery) that is
defective in material or workmanship.
Limited Warranty on Selected Grill Parts
From one year after the date of purchase for the
designated time periods listed below, Sears will
replace the following grill parts if they are defective
in material or workmanship. You will be charged
for labor.
• Lifetime of Grill; Exterior Stainless Steel Parts,
Aluminum Castings (except for paint loss)
• 2 Years: Flame Tamers, Cooking Grids, Burners
• 4 Years: All Other Grill Parts (except ignitor battery)
Warranty Service
Warranty service is available by contacting your
nearest Sears Service Center.
Warranty Restrictions
• This warranty is void if grill is used for commer­
cial or rental purposes.
• This warranty applies only when the grill is
used in the United States.
• This warranty gives you specific legal rights,
and you may also have other rights which vary
from state to state.
Sears, Roebuck and Co., Dept. 817WA,
Hoffman Estates, !L 60179
A
WARNING
Combustion by-products produced when
using this product contain chemicals known
to the State of California to cause cancer,
birth defects, or other reproductive harm.
A '
WARNING
Failure to comply with these instructions
could result in a fire or explosion that
could cause serious bodily injury, death,
or property damage.
Grill Installation Codes
This gas grill must be installed in accordance with
all local codes. In areas without local codes,
follow the latest edition of the National Fuel Gas
Code ANSI Z223.1. In Canada, installation must
conform to standard CAN/CGA 1b149.1 or 1-b149.
2 (Installation Code for Gas Burning Appliances
and Equipment) and all local codes.
Correct LP Gas Tank Use
LP gas grill models are designed for use with a
standard 20 lb. Liquid Propane Gas (LP gas)
tank, not included with grill box.
Never connect
your gas grill to an LP gas tank that exceeds
this capacity. A tank of approximately 12 inches
in diameter by 18-1/2 inches high is the maxi­
mum size LP gas tank to use. We recommend
buying an "OPD" gas tank which offers an Overfill
Prevention Device. This safety feature prevents the
tank from being overfilled which can cause mal­
function of the LP gas tank, regulator and/or grill.
The LP gas tank must be constructed and
marked in accordance with specifications of the U.
S. Dept, of Transportation (DOT). In Canada, the
LP gas tank must meet the Canadian Transporta­
tion and Communications (CTC)
specifications. Also be sure:
1. The LP gas tank has a shutoff valve, termi­
nating in an LP gas supply tank vaive outlet,
that is compatible with a Type 1 tank con­
nection device. The LP gas tank must also
have a safety relief device that has a direct
communication with the vapor space of the
tank.
2. The tank supply system must be arranged
for vapor withdrawal.
3. The LP gas tank used must have a collar
to protect the tank valve.
Sears, Roebuck and Co.