Drop-down shelf (on some models), To remove and replace the drop-down shelf, Adjusting the control – Kenmore 10656713500 User Manual

Page 16: Meat storage guide, Crisper and convertible vegetable/meat drawers, To remove and replace drawers, Using the controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Drop-Down Shelf (on some models)

2. Lift crisper cover frame and remove. Repeat steps to remove

the meat drawer cover.

To Remove and Replace the Drop-down Shelf:

1. Remove the drop-down shelf by sliding it up and back. Pull

forward slightly to release the rear pegs from the track as

shown.

2. With the rear pegs released, pull the shelf down and forward.

3. Replace the shelf by sliding the front pegs into the track.

Push the shelf up and back until the rear pegs drop into the

track. Pull down and forward to be sure the shelf is securely

in place.

The deli drawer stores raisins, nuts, spreads, and other small
items at normal refrigerator temperatures.

To Remove and Replace the Deli Drawer:

1. Remove the deli drawer by sliding it straight out to the stop.

Lift the front and slide the drawer out the rest of the way.

2. Replace the deli drawer by sliding it back past the stop.

Replace back of meat drawer cover frame into supports or
slides on side walls of the refrigerator and lower or slide the

front of the cover frame into place.

Slide rear of glass insert into cover frame and lower front into
place. Repeat steps to replace the crisper cover.

The convertible vegetabie/meat drawer can be adjusted to

properly chill meats or vegetables. The air inside the pan is
cooled to prevent “spot” freezing and can be set to keep meats
at the National Livestock and Meat Board recommended storage

temperatures of 28° to 32°F (-2° to 0°C).

IMPORTANT: To extend freshness, wrap meats in airtight,
moisture-proof materials before storing. Always store meat as
recommended.

Adjusting the Control

The convertible control comes preset at the lowest meat setting.

To change a control setting: Move the control to the right
(colder) or to the left (less cold) as desired.

To store vegetables: Set the control to VEG (all the way to the

left) to store vegetables at their optimal storage temperatures
(which need to be warmer than those for meat).

IMPORTANT: If food starts to freeze, move the control to the left
(less cold). Remember to wait 24 hours between adjustments.
Doing so gives the temperature of the food time to change.

Meat Storage Guide

Crisper and Convertible Vegetable/Meat Drawers

To Remove and Replace Drawers:

1. Slide crisper or meat drawer straight out to the stop. Lift the

front of drawer with one hand while supporting the bottom of

drawer with the other hand and slide the drawer out the rest
of the way.

2. Replace the crisper or meat drawer by sliding it back in fully

past the drawer stop.

Crisper or Vegetable/Meat Drawer Covers

To Remove and Replace Covers:

i. Remove the crisper and meat drawer. Press up in center of

crisper glass insert until it rises above the plastic frame.
Holding the crisper glass firmly, carefully slide the glass insert

forward to remove.

Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,
freeze the meat.

Fresh fish or shellfish........................ use same day as purchased

Chicken, ground beef, variety meat (liver, etc.)................1-2 days

Cold cuts, steaks/roasts................................................... 3-5 days

Cured meats.................................................................. 7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.

16

Advertising
This manual is related to the following products: