Foam filter care, Warning, Exhaust filter removal and replacement – Kenmore 216.3701 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FOAM FILTER CARE
i
Remove foam filter
from dirt container.
Hold filter under
running water to
wash. Ring excess
water out of filter.
Allow filter to dry for
at least 24 hours.
Return filter to dirt
container by placing
on top of screen
inside dirt container.
IMPORTANT: Do not return filter
to the dirt container before it has
completely dried.
EXHAUST FILTER REMOVAL AND REPLACEMENT
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
Note:
For best performance, replace the
exhaust filter a minimum of every 6 months.
Grasp tab on exhaust filter cover and
pivot forward to remove.
Remove exhaust filter from deaner. Tap
filter on inside of garbage can to remove
excess dust and dirt from filter.
Return exhaust filter to cleaner. Replace
exhaust filter cover by inserting the tab
on the cover Into the slot on the cleaner.
Pivot toward deaner until cover snaps
into place.
12