Exhaust filter replacement, Warning, Motor safety filter – Kenmore 1T6.31100 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Electrfcctl Shock Hoiord

Unplug power cord from eleciricat outlet.
Do not operote the vocuum cleaner

without the motor safely filter. Be sore the
filler is dry and properly installed to

prevent motor failure ond/or electrical

shock.

ik

WARNING

MOTOR SAFETY FILTER

Check motor
safety filter
frequently and
clean when dirty.

Remove the dust

bag as outlined in

the DUST BAG

REPLACEMENT

section,

kl

F//fer Cover­

Motor Safely j
F/tfer-

If the filter, located in the bottom of the

dost bag chamber, Is dirty, remove it by

pulling forward out from under the ribs.

Wash the foam filter In warm soapy
water, rinse and dry thoroughly by

squeezing the filter in your hand and
letting It air dry.

DO NOT wash in the dishwasher,

DO NOT install damp.

Replace the foam filter by sliding it back
into place under the ribs in the dost bag
charnber.

Replace the dust bag os outlined in the

DUST BAG REPLACEMENT section.

EXHAUST FILTER REPLACEMENT

The HEPA exhaust filter must be replaced

when dirty It should be replaced

regularly depending on use conditions.

The filter CANNOT be washed os it will
lose its dust trapping ability.

Note: See PARTS AND FEATURES

for the exhaust filter number.

1. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cleaner.

Press
Filter Cover

Release Tab

2. Remove the
filter cartridge
from cover.

3, Place new filter cartridge into cover
moking sore that airflow arrow on side of
cortrldge points into cover.

Place foam seal of filter against the

vacuum cleaner body.

Bxfmmt

Filter

4. Replace the exhaust filter cover by

plocing bottom tobs in slots and raising
cover up until it snaps into ploce

IB

Advertising