Kenmore 1T6.31100 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOSE AND WAND
1. Insert the tab on
the telescopic wand
into the “J” slot on
the hose handle.
Twist the telescopic
wand to lock In
place.
2. Place the telescop
ic wand In the wond
holder and route the
hose as shown.
3. Snap the
hose handle
into the hose
holder locoted
on the handle
of the vacuum
cleaner.
NOTE!
Be sure
the raised
edge of the
hose handle
rests against
edge of the
hose holder.
4. Rotate the
hose release
lever down
and route the
hose as
shown,
5. Snap the
hose Into the
hose cuff on
the side of
the vacuum
cleaner
6. Rotate the hose
release fever
upwards to lock
the hose in place.
A
CAUTION
Do not operate the agltotor without the
wond properly inserted into the wand
holder ond the hose hondle properly
secured in the hose holder