Troubleshooting, Warning, Vacuum cleaner help line – Kenmore 1T6.31100 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING

Review this table to find do-it-yourself solutions for minor performance problems. Any

service needed, other than maintenance described in this Use & Care Guide, should be

performed by a Sears or other qualified service agent.

WARNING

Disconnect electricol supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury.

PROBLEM

Vocuum

cleoner

won't run

Poor job of dirt
pick-up.

Vacuum eieoner picks
up movoabla rugs or

pushes too hard.

POSSIBLE CAUSE

POSSIBLE SOLUTION

1, Unpiugged ot woll outtet.

2, Tripped circuit breaker/blown fusu

at household service panel.

3, Thermal protector tripped.

4, Defective wall outlet

1. Full or clogged dust bag

2. Wrong pile height setting,

3. Worn agitator.

4. Clogged nozzle or bag holder.

5. Clogged hose.

6. Hole in hose.

7.

Hose not Inserted fully.

8. Motor protection system

activated.,

9. Dirty filters.

1. Wrong pife height settlng-

1 Plug l.n firmly, select the

desired setting on the touch

control.

2. Reset circuit breaker or replace

fuse,

3. Allow vacuum cleoner to cool

40-50 minutes,

4. Check with o good appliance or

lomp Have outlet properly

serviced.

1. Change bag,

2. Adjust setting
3. Replace agitator,

4. See CLOG REMOVAL

section of this Use & Care Guide.

5. Check for clogs ,

6. Replace hose.

7. Insert hose fully

8 Check for clogs.

9. Clean or change motor

safety filter and exhaust filter.

1, Adjust setting.

Agitator does not
turn.

1. Handle in full upright position,

2. Agitator overbad tripped,
3. Thermol protector tripped.

1. Move handle from upright

position.

2.

Reset ogitolor overbod protector,

3„ Allow vacuum cleoner to cool

40-50 mirtules.

Airflow restricted
with attachment use;
sound changes.

1. Attachment use restricts air flow

2. New carpet fuzz dogged a!r path

1. Check attochements for fuzz,

lint, pet hair or other debris.

2. Clean out hose. See CLOG

REMOVAL section of this Use &
Cor# Guide.

Vacuum Cleaner Help Line;

1-877-531-7321

SíOOam-SíOOpm EST, M-F

{U.S.A. and Cañado)

21

Advertising