Kenmore 415.165059 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Control Panel and Firebox Support
I
Stand cart upright.
In front, fit control panel between left and right legs. Insert #10-24x2” machine screws to hold panel in place. Place upper
firebox supports onto screws making sure angle side is facing the front and attach with # 10-24 flange nuts.
In back, attach upper firebox support with #10-24x2” machine screws and # 10-24 flange nuts.
#10-24x2”
Machine Screw
Qty.8
I
#10-24
Flange Nut
Qty.8
#10-24x2”
Valve/Hose/Regulator and Ignitor
Attach valve/hose/regulator assembly to control panel using #10-24x1/2” machine screws.
_ Remove ignitor cap and plastic hex nut from Electronic Ignition Module assembly. Insert module into the opening on
control panel and attach with the removed hex nut. Place AAA battery into module slot with positive end (+) facing
outward. Screw ignitor cap onto module.
■ Button
#10-24x1/2”
Machine Screw
Qty.2
#10-24x1/2”
Machine Screw
K
„...■ AAA
Battery
....Hex Nut
\
Valve/ Hose/ Reaulator
Assembly ..
16
-464722309
-464722509