Kenmore 100.81002 - Manual (Page 5)

OPERATING YOUR FOOD PROCESSOR
ASSEMBLY cant.
4 On the Bowl Cover are the bod chute, food chuls lid, and movable loop, which serves
as a housing for the food pusher Also included is the shaft conlaining the spring
mechanism that controls the slide button used to lock the food chute lid Into place
These are part of Ihe Bowl Cover assembiy
5 Place the Sow! Cover Assembly onto the Bowl, Align the arrow on (he Cover and She
unlock icon on the Bowl {see Fig- 2 and 2a) Turn the Cover counSsrclockwise towards
(he canter front until II clicks
NOTE; There Is only one posillort for Ihe Bowl Cover to lock onto Bowi.Tha unit will nol
operate if Ihe Bowl Cover does not lock onto the Bow), or If the Food Chute Lid does not
ialch onto the Food Chute
6 Make sure the food chute lid is securely latched info place.
7 To open the Food Chute Lid- pul! the Slide Rslease Button out Lift the Food Chute Lid
and Movable Loop (see Fig 3 and 3a) up arrd back to open
8, When
. . , m
blades down In the bowl instead of d)sc.s at the top of the bowl.
When locked logelher. the food pusher and movable loop carr also act as one larger food
pusher To lock the food pusher into the movable loop, slide the tab located on ihe food
pusher Into the slot on the rtm ol Ihe movable loop
5