Óperáting yóür food processor – Kenmore 100.81002 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ÓPERÁTiNG YÓÜR FOOD PROCESSOR
TO SLICE OR SHRED
Goni
6 Turn CDr^irol knob swilch to ON, than press dawn lightly but fttmly on food pusher and
movable loop to feed Iteras down and onto sllce/shred disc. When the chute is empty,
turn control knob switch to OFF, unplug, allow the disc to slop rotating, and unlatch the
food chula lid
7 To process more food, place tuod into the food chute and repeat above steps When
tlnished, press OFF, unplug, and allow disc to slop rotating.
CAUTION:
Before opening the Bowl Cover Assembly, be sure you
have turned the unit OFF and unplugged the cord.
B Open bow! cover by turning clockwise, and remove disc with disc stem.
WARNING;
Slicing/Shredding Disc is very sharp. Use caution when
handling.
9 Lititock Bowi by turning clockwise lowarris Unlock icon and lift bowl off,
Empiy ihe processed tood.
TO PROCESS LONG AND THIN FOOD FTEMS
CAUTION:
flAeke sure control knob switch is turned to OFF and unit la
unplugged before use. Never use your hand to push food Into processor.
The use of heavy pressure will not speed operation.
1 Lock the Bowl omo the Base as described in Assembly
2 Slide the disc stem down onto the center post of Ihe base, then place Ihe Bdce/shred
disc- with the desired side facing up for either slicing or shredding, onto the disc stem
and push dowrs At this point the disc will be at the lop of the bowl
WARNING:
WARMING: Sllcing/Shredding Disc Is very sharp.
Use c&ution when handling.
3- Lock bowl cover assembly onto bowt
4.
Make sure the food chute lid Is latched into place
a