Dishwasher use, Smart display – Kenmore 13163 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DISHWASHER USE
Smart Display
The dishwasher is equipped with the latest LED display technology. The Smart Display depicts an image of what is
happening inside of the dishwasher. The chart below explains what each symbol means on the Smart Display when it
appears.
LOCKEC
DEW
NOT SANITIZEf)
2 1 COMPLETED
1....................... 1
Symbol Description Symbol Description Symbol Description Symbol Description
The
Dishwasher
is filling with
water.
The wash
portion of the
cycle is in
progress.
.oymPo* The Hi Temp
wash option is
in progress.
The TuRBoZoNE™
option is
operating to
clean tough soils.
The rinse
portion of the
cycle is in
progress.
The
SfeamSanitize
option is
operating to
sanitize the
dish load.
The Heated
Dry option is in
progress.
“A Pressing the
I Cancel/Drain
■ ■ ; D button once will
cancel the cycle
j and option
" ...... selection.
The second time
that Cancel/Drain
is pressed, the
dishwasher will begin to drain,
and the status bar indicator
will count down until the drain
is completed.
The status bar indicator
shows a countdown of the
cycle selected until it is
completed.
LOCKED
Indicates that the controls
are locked. Press and hold
Heated Dry for 4 seconds to
unlock the controls.
DEWY 4 2 1
Indicates how many hours
are left from the time the 4
Hour Delay option was
selected until the
dishwasher is set to run.
SANITIZED
Indicates that the dish load is
sanitized.
Indicates that the dish load is not sanitized, which may be
due to the cycle being interrupted.
COMPLETED
Indicates that the selected cycle is completed.
16