To operate the warmer (warm & ready™) drawer, Setting warmer drawer controls – Kenmore 790.75604 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Warmer Drawer Controls

Arranging Warmer Drawer (Warm & Ready™ Drawer) Rack Positions

The rack can be used in 2 ways:
• In the

upright position

to allow low profile food items to be placed both under and on top of the rack (for example, rolls

or biscuits on top of the rack and a casserole dish under).

• In the

downward position

to allow you to place lightweight food items and empty dishware (for example, rolls or pastries

and dinner plates).
Set the warmer drawer rack as illustrated.

Use the warmer drawer to keep hotfoods
hot such as: vegetables, gravies, meats,

casseroles, biscuits and rolls, pastries
and heated dinner plates.

The warmer drawer is equipped with a
catch which may require extra force when
opening and closing the drawer.

OFF

LO/

1

1

1

f

MED

.

WARMER.

■ DRAWER ............................

Warmer Drawer Recommended

Food Settings Chart

Food Item

Setting

Roasts (Beef, Pork, Lamb)

MED

Pork Chops

HI

Bacon

HI

Hamburger Patties

HI

Poultry

HI

Gravies

MED

Casseroles

MED

Eggs

MED

Fried Foods

HI

Vegetables

MED

Pizza

HI

Biscuits

MED

Rolls, soft

LO

Rolls, hard

MED

Pastries

MED

Empty Dinner Plates

LO

To Operate the Warmer (Warm & Ready™) Drawer

Your range is equipped with a warmer drawer. The purpose of the warmerdrawer
is to keep hot cooked foods at serving temperature. Always start with hot food. It
is not recommended to heat cold food in the warmer drawer.

Ail food placed in the warmer drawer should be covered with a lid or aluminum foii
to maintain quality.

Do not use plastic wrap to cover food. Plastic may melt

onto the drawer and be very difficult to clean.

Use only dishware, utensils and cookware recommended for oven use in the

warmerdrawer.

i^CAUTION

I Always use potholders or oven mitts when removing food from the

warmer drawer as cookware and plates will be hot.

To Set the Warmer (Warm & Ready™) Drawer Thermostat Control

The thermostat control is used to select the temperature of the warmer drawer.

It is located on the control panel. To set the thermostat, push in and turn the knob

to the desired setting. The temperatures are approximate, and are designated by

HI, MED and LO.

1. Turn the knob to select the desired temperature setting.

2. For best results, preheatthe drawer before adding food. An empty drawer will

preheat in approximately 15 minutes.

3. Turn the thermostat control to

OFF

after use.

Warmer (Warm & Ready™) Drawer Temperature Selection

Referto the chart in the side column for recommended settings. If a particularfood

is not listed, start with the medium setting. If more crispness is desired, remove
the lid or aluminum foil.

Most foods can be kept at serving temperatures by using the medium setting.

When a combination of foods are to be kept warm (for instance, a meat with 2
vegetables and rolls), use the high setting.

Refrainfrom opening the warmer drawer while in use to eliminate loss of heatfrom

the drawer.

15

Advertising
This manual is related to the following products: