To start the self-clean cycle, Stopping or interrupting a self-cleaning cycle, Self-cleaning – Kenmore 790.75604 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Self-Cleaning

V'

© T’

I ! ffra»

To Start the Self-Clean Cycle

For satisfactory resuits, use a 2 hour self-clean cycle for

light soils

and a 3 hour cycle for

average or heavy soils.

NOTE:

The kitchen area should be ventilated using an open window, ventitlation fan or exhaust hood during the first self-clean

cycie. This will help eliminate the normal odors associated with the first seif-clean cycle.

To Set the Controls for a Self-Clean Cycle:

1. Be sure the clock shows the correct time of day.

2. Press "--------------------------" appears in the display.

3. Press the until "3:00" appears in the display for a 3 hour cycle, or press the 'V' until "2:00" appears in the display

for a 2 hour cycle.

4. As soon as the

or 'V'

is released, "CLn" appears in the display.

5. As soon as the controls are set, the motor driven lock will begin to ciose automatically and the "LOCK” indicator light will

flash.

DO NOT

open the door while the light is flashing (it takes about 15 seconds for the oven door to lock).

6. The "LOCK" light wiil glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1. The time of day or "End" will appear in the display window and the "Clean” and "LOCK" light will continue to glow.

2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3. If “End” is in the display and the "Clean" indicator remains on, press [eMj. The time of day will appear in the display.

NOTE:

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycie:

1. Press isM,].

2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3. Restart the self-clean cycie once all conditions have been corrected.

^CAUTION

To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side

of the oven when opening the door to allow hot air or steam to escape.

ià CAUTION

I

DO NOT

force the oven door open. This can damage the automatic door locking system. Use caution and avoid

possible burns when opening the door after the self-cleaning cycie has completed. The oven may still be VERY HOT.

18

Advertising
This manual is related to the following products: