Oven vent location, Arranging oven racks, Removing & replacing oven racks – Kenmore 790.75604 User Manual
Page 8: Arranging oven racks with 6 rack positions, Before setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Setting Oven Controls
Oven Vent Location
The oven vent is located
below the backguard.
When the
oven is on, warm air is released through this vent. This venting
is necessary for proper air circulation in the oven and good
baking results. DO NOT BLOCK THE VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS
COOL (PRIOR TO OPERATING THE OVEN).
Always use
oven mitts when using the oven.
Removing & Replacing Oven Racks
To remove,
pull the rack forward until it stops. Lift up front of
rack and slide out.
To replace,
fit the rack onto the guides on
the oven walls. Tilt the front of the rack upward and slide the
rack back into place.
Arranging Oven Racks with 6 Rack Positions
To bake on a single rack,
place the rack on position 3 or 4.
To bake on 2 racks,
place the racks on positions 3 and 5.
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
Food
Rack Position
Broiiing meats, chicken or fish
1,2 or 3
Cookies, cakes, pies, biscuits & muffins
3 or 4
Frozen pies, angel food cake, yeast, bread,
casseroles, smail cuts of meat or poultry
5
Turkey, roast or ham
6
Note: Always use caution when removing food from the iower rack
positions..