Brother INTELLIFAX 820MC - Manual (Page 110)

r p ^ i i N i AIMU
.
I nn IPH*! iS^Mi
il®i:llllllM
1 /. PRINTING REPORTS AND LISTS
You can print the following lists and reports under function item 3. PRINT REPORTS.
Level one
function
1 Level two
function
Explanation of Options Page
PACT. REPORT
The Activity Report lets you know
whether transmissions and incoming
faxes were received.
11-3
2. ALL DIAL
This is a list of the names and numbers
that are stored in One-Touch and Speed-
Dial memory. Printed in One-Touch
and Speed Dial number order.
11-3
3. TEL. INDEX
(Only for FAX-
820MC)
The same as the All Dial list but printed
in alphabetical order.
4. COVERPAGE
This allows you to check the Cover Page
format.
6-15
3. PRINT REPORTS
5. CALL BACK MSG
Used to check the Call Back message
format.
6-20
6. USER OPTIONS
The settings for Function menu 5~8
(USER OPTIONS, TEL OPTIONS,
SETUP SYSTEM and SETUP MSG
CTR) are printed here.
7. XMIT REPORT
You can set up whether the Transmission
Verification Report will be printed after
all faxes you send.
ON/OFF
11-4
8. MEMORY STATUS
The addressee and the amount of
occupied memory for items stored in
the memory are printed here.
11-5
Other Reports
The following reports are printed automatically, for your information.
Help List (By pressing HELP on the control panel.) {See page 3-7-9)
Power Failure Report
Polled Report
Delayed Sending Report
Broadcast Report
Sequential Polling Report
(right Helpful Hinfs • If you need an ACS check sheet, press (left arrow) and
arrow) simultaneously.
• If you press (left arrow) and (right arrow) simultaneously
again, an ACS check sheet will not be printed.
11-1