Pioneer PD-M550 User Manual

Cid piomeer, Operating instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating

Instructions

MULTI-PLAY COMPACT DISC PLAYER

PD-M550

PD-M455
PD-M453

PD-M450

DIGITAL AUDIO

PD-M550

PD4VI455

PDM453

PD-M450

Thank you for buying this Pioneer product.

Please read through these operating instructions so you

will know how to operate your model properly. After you

have finished reading the instructions, put them away in a
safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of
connecting and operating the unit is the same.

WARNING:

to

prevent

fire

or

shock

hazard

,

do

NOT

expose

this

appliance

to

rain

or

moisture

.

IMPORTANT NOTICE

[For U.S. and Canadian models]

The serial number for this equipment is located on the rear panel.

Please write this serial number on your enclosed warranty card

and keep it in a secure area. This is for your security.

“This product complies with the Radio Interference require­

ments of the EC (European Community) Directive 87/308/CEC."

THE POWER SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS

POWER IN STANDBY POSITION.

LINE VOLTAGE SELECTOR SWITCH

Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.

Never use this model with 110V setting in Saudi Arbla.

The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the factory,
the switch is set to the power requirements of the player's
destination. Check that it is set properly before plugging
the power cord into the outlet. If the voltage is not properly
set or if you move to an area where the voltage requirements

differ, adjust the selector switch as follows;
• Use a medium-sized <flat blade) screwdriver. Insert the

tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage making of
your area points to the arrow.

VOLTAGE SELECTOR

CiD PIOMEeR*

77ie Art cff EnS&rtsunmein

Advertising
This manual is related to the following products: