Kenmore 580.76100 - Manual (Page 6)

NSTALLATION
INSTALLATION
Pick a iocatiori which wi allow you io blow the ooid
air into the area you want Windows used for
instaHation must be strong ertou^ to support the
weight of the air conditioner. Qood instaiiation with
special attention to the proper position of ttie unit
will lessen the tttance that service will be needed.
When cooling more than one room, instaliatfon
location is very importartt To coo! your rooms, cold
air most be blown from fie air conditioner in a
straight path.
HOW TO INSTALL
If the air conditioner is blocked by & storm
window frame, see step 19 on |oage S before
0 1001118 to Install.
Remove the screws which fasten the cabinet at
both sides and at the back. Save side screws.
Discard back screws.
a SiWe the unit out of the cabiret by gripping the
! pan handle and puli forward while bracing the
cabinet.
Q Cut the fOm SEAL (ITEM I) to fit the
underside of the window sash. Peei off the backing
and attach toe FOfM SEAL as shown in Fig. 5.
hbf insert the side curtain ffTEM A) Wo ths upper
guide and lower guide of the air contfMofter. Fasten
the curtains to the unit with screws |ITEM E).
window inner sill.
Carefully place the cabinet on the vwntlow toner sill
and align the center of cabinet front «iti the cerster
line marired in the Mndow inner si.
m
Puli the bottom window sash down behind fie
upper puida until they meet.
MOTE; Do not puli ths window sash down so tightly
toatths movement of side curtain is restricted.
mm Loosely assemble the si supports using the
parts in FK3.9,
INDOOR
\sJ I
QyypQQp
ITEM6
•ITEMO
ÌTEMC
FIG. 9
- 6 -