Viewing an image from a computer, Connecting a computer, Displaying an image from a computer – Pioneer PDP-503HDE User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using external equipment
Viewing an image from a computer
Connecting a computer
Use the PC terminals to connect a computer.
I NOTE >
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 60 for a list of computer signals compatible with the Plasma Display System.
Media Receiver (front view)
Signal names for 15-pin mini D-sub connecter
.
o\ ® ® ® ® ® /Ü
Pin No.
Signal name
Pin No.
Signal name
Pin No.
Signal name
®
R
(D
GND (Ground)
®
Not connected
(D
G
®
GND (Ground)
SDA
(3)
B
(D
GND (Ground)
HD
@
Not connected
(D
+ 5V
VD
(D
CSYNC
GND (Ground)
©
SCL
I
NOTE >
• Macintosh adaptor may be required for use for some Macintosh computers.
INPUT SOURCE
TV
1NPUT1
INPUT2
INPUTS
INPUT4
PC
Displaying an image from a computer
When connecting to a computer, the correct input
signal type Is automatically detected. (See page 49.)
If the computer image does not come in clearly, you
may need to set the Auto Sync, adjustment on the “Auto
Sync.” In the menu. (See page 48.)
You only need to select the input source on the “INPUT
SOURCE” menu.
To view an image from a computer, select “PC” from
the “INPUT SOURCE” menu using -© on the remote
control unit or INPUT on the Plasma Display. (See page
49.)
I
NOTE >
• Each time -Q is pressed, the input source toggles.
-44