Brother FAX-400 - Manual (Page 49)

V-1. RESOLUTION
F A X E N T E R F A X N O .
C O P Y P R E S S C O P Y K E Y
- Any pages for which you did not set a resolution will he
transmitted at the same resolution as the last page for which you
did set a resolution.
STAfir 6) Select the fax number in the usual way and press the START key.
Your document is sent at the specified resolutions.
After transmission has been completed the unit reverts to standard
resolution mode. The three resolution LEDs are not lit.
The resolution of
in-coming documents The resolution of fax transmissions that you receive depends
entirely on the capabilities of the fax machine from which the
document was transmitted and the settings selected by the person
sending it. Your fax machine can receive and print documents in
three modes, STANDARD, FINE and SUPERFINE. The mode
being used to print the document (or the current page) is indicated
by the LED lights.
The photo LED is not lit when receiving a document in photo mode.
Copier resolution
I FINE
I S.FINE
1 PHOTO
copy
r.. .... . ~l
You can use the convenience copier in SUPERFINE or PHOTO
modes. However, you can only use a single mode for each copy
operation. Pages of a document that are to be copied at a resolution
different to that of the rest of the document must be loaded and
copied separately.
Set the document in the feeder. Select a mode by pressing the
resolution key, and then press the COPY key. If you make a copy
without having first selected a resolution, the machine will
automatically copy using "SUPER FINE" mode. The SUPER FINE
LED will come on to show that this mode is being used.
After you have made your copy the unit reverts to the standard
resolution mode. The three LEDs are not lit.
V-1-3