Assembly instruction, Install casters – Kenmore LIQUID PROPANE GAS (LPG) GRILL 119.1623 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Instruction
Please refer to pages 5 through 8 for item graphics.
Install Casters
mM □ Place the Cabinet Assembly (A) upside down and attach the 4
Casters to the Caster Seats. Use care to install each Caster into the
correct position.
01
Washer: M6
Qty: 16
Part # SB0005
(|lll
Install Cylinder Support Ring, Cabinet Front Crossbar and Cabinet Door
□ Put the Cylinder Support Ring (U) into two holes in left side cabinet frame. See Inset 1
□ Attach the Cabinet Front Crossbar (B) to the Cabinet Assembly using 4 Bolts M5x3/8" and 4
M6 Washers. See Inset 2.
D
Attach Cabinet Left Door (J) and Cabinet Right Door (K) to the Cabinet Assembly using 8 Bolts
M4x3/8". See Inset 3.
Phillips Head Bolt: M6x3/8"
Qty: 4
Part # SB0004
Washer: M6
Qty: 4
Part # S80005
Inset 2
[*■
Flat Head Bolt: M4x3/8
Qty: 8
Part # SB0029