Place lp cylmder into the cabinet – Kenmore LIQUID PROPANE GAS (LPG) GRILL 119.1623 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Place LP Cylmder into the Cabinet
D Unhook the cylinder support ring and hold at top of cabinet.
□
Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure
the valve faces to the front.
□
Wrap the cylinder support ring around the top of the tank and hook to secure the LP
cylinder in place.
Attach Regulator Hose Support Ring to Cabinet Side Panel
□ Remove the nut from the bolt on the inside of the left cabinet side panel, It's located
towards the top of the side panel near the front. See Inset 1.
n Find the metal ring located on the hose of the regulator assembly and attach to the bolt on
the left cabinet side panel securing it with the nut. This will keep the hose away from
hot surfaces. See Inset 2.
DO Not Hook Up the LP Cylinder to the Regulator Assembly at this time.
20