Kenmore 401.39000 - Manual (Page 8)

ASSEMBLY INSTRUCTIONS
EXTENSION WAND
PLACEMENT
Place the crevice tool (A) in the top of
the extension wand. Place the
extension wand (B) in the wand holder
on the side of the vacuum cleaner.
OPERATING INSTRUCTIONS
POWER CORD
1. The power switch is located on the
side of the vacuum. Push the rocker
switch “ON” to vacuum, and “OFF”
when cleaning is complete.
A
!\ WARNING
To reduce the risk of electric shock,
this appliance has a polarized
plug (one blade is wider than
the other). This plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician
to install the proper outlet. Do not
change the plug in any way.
2. Unclip the power cord plug from the
power cord. Place the power cord into
the cord clip on the body as shown.
This helps keep the power cord
out from under the vacuum cleaner
nozzle.
3. Plug the polarized power cord into a
120 Volt outlet located near the floor.
4. To store cord, turn upper cord wrap to
the up position, then wrap cord.
A
!\ WARNING
Personal Injury and Product
Damage Hazard
• DO NOT plug in if switch is in the
ON position. Personal injury or
damage could result.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
occur.