Installation with the rubber bush, Verwijderen van bet apparaat, Installation – Pioneer DEH-P7300R User Manual

Page 6: Fig.3 installation with the rubber bush, Fig. 4 verwijderen van bet apparaat, Afb.5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation

Note:

Before finally installing the unit, eonneet the

wiring temporarily, making sure it is all eonneet-

ed up properly, and the unit and the system work

properly.

Use only the parts ineluded with the unit to ensure

proper installation. The use of unauthorized parts

ean eause malfunetions.

Consult with your nearest dealer if installation

requires the drilling of holes or other modifiea-

tions of the vehiele.

Install the unit where it does not get in the dri­

ver’s way and eannot injure the passenger if there

is a sudden stop, like an emergeney stop.

The semieonduetor laser will be damaged if it

overheats, so don’t install the unit anywhere hot

— for instanee, near a heater outlet.

If

installation

angle

exeeeds

60°

from

horizontal,

the

unit

might

not

give

its

optimum

performanee.

(Fig. 3)

Fig.3

Installation with the rubber bush

Holder

After

inserting

the

holder

into

the

dash­

board, then seleet the appropriate tabs

Fig. 4

Verwijderen van bet apparaat

Trek naar buiten om het frame te

verwijderen. (Om het frame weer aan te

brengen, plaatst u de kant met de groef

omlaag en bevestigt u het aldus.)

Steek de bijgeleverde verwijdersleutels

in het apparaat, zoals in de afbeelding

aangegeven, tot ze op hun plants

vastklikken. Mould de sleutels tegen de

zijkanten van het apparaat aangedrukt

en trek het apparaat naar buiten.

Afb.5

Advertising
This manual is related to the following products: