Cancelling the centering mode, Right margin flush – Brother SX-4000 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LAYOUT FUNCTIONS
Cancelling the centering mode
1) Before you have typed anything:
CTR
n + n
To cancel the centering mode before you have typed any text, press
[ALT]
+ [CTR] (9).
The carrier then returns to its original position.
2) After entering some characters:
If you have entered some characters, press
[CORRECT]
until the display is
blank. Then either retypeyour text or press
[ALT] + [CTR] (9)
to escape from
the mode.
Right margin flush
RMF
n+D
Your typewriter can automatically print text flush (or even) with the right margin.
This is particularly useful for dates and other headings.
1)
Press
[ALT] + [RMF] (0).
The carrier will go to the right margin.
2) Type the text. The characters will not be printed immediately, but will first be
displayed. At this point, you can still make corrections in display mode (for
more information, see the next section, p.29.) The carrier will backspace
once each time a character is entered.
The beep will sound if you run out of room, and you will not be able to
enter any more characters.
3)
To print the text, press
[TAB]
or
[RETURN]
. When printing is finished, the
carrier will go to the right margin, or return to the left margin on the next line.
Ri(^t margin
T
December 7th, 1994
27